Print | SAMSUNG

How to replace the lamp (for RL38 **, RL41**, RL44**)

STEP 1. Refrigerator Compartment (LED Type)

No title

Caution

• Before changing any of the interior lights, unplug the refrigerator from the power supply.

• Bulbs can get extremely hot. Allow the bulbs to cool before replacement.

1. Refrigerator Compartment (LED Type)

The refrigerator lights are located in the refrigerator. There is no light in the freezer.

1) Remove all shelves, plastic drawer, and Cool Select Zone drawer.

Remove all shelves, plastic drawer, and CoolSelect Zone drawer.

2) Pull out cover lamp after removing one screw as shown.

Pull out cover lamp after removing one screw as shown.

3) Remove 3 screws as shown, and disconnect the upper and lower wire connectors.

Caution: When disassembling, make sure the unit is turned off.

Remove 3 screws as shown, and disconnect the upper and lower wire connectors.

4) Remove tape covering of wire at the back side, and remove 3 screws at the front side.

Remove tape covering of wire at the back side, and remove 3 screws at the front side.

STEP 2. Refrigerator Compartment (Bulb Type)

No title

2. Refrigerator Compartment (Bulb Type)

The refrigerator lights are located in the refrigerator. There is no light in the freezer.

1) Remove all shelves, plastic drawer, and Cool Select Zone drawer.

Remove all shelves, plastic drawer, and CoolSelect Zone drawer.

2) Pull out cover lamp with both hands.

Pull out cover lamp with both hands.

3) Remove bulb, and then remove 5 screws located at upper and lower side.

4) Disconnect the upper and lower wire connectors as shown.

Disconnect the upper and lower wire connectors as shown.

1. Be careful when you disassemble, it is fragile due to low temperature inside.

2. Double check if you use the correct one before replacing.