[Overview]
Your
machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-, Folio-,
Executive-, B5-, A5-, or A6-sized paper. When you copy using this feature, the
machine prints one side of the original on the upper half of the paper and the
other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item, such as a name card.
This
copy feature is available only when you place originals on the scanner glass.
[Solution]
1.
Press Copy.
2.
Place a single original face down on the scanner glass.
3.
Press Menu until Copy Feature appears on the bottom line of the
display and press OK.
4.
Press the Scroll buttons until ID Copy appears and press OK.
Place Front Side and Press[Start] appears on the display.
5.
Press OK or Start. Your machine begins scanning the front side
and shows Place Back Side and Press[Start].
6.
Open the scanner lid and turn the original over
※
Note
If
you press Stop/Clear or if no buttons are pressed for approximately
30 seconds, the machine cancels the copy job and returns to Standby mode.
7.
Press Start to begin copying.
※
Note
If
the original is larger than the printable area, some portions may not be
printed.
|